Mycut Plugin Coreldraw X7 Jun 2026

The Mycut plugin is a specialized software extension designed to embed cutting functionalities directly into the CorelDRAW X7 interface. Instead of exporting your designs into a separate cutting software (like Artcut or SignMaster), the plugin allows you to send paths directly to your Mycut plotter with a single click. Key Technical Features:

Match this exactly to the COM port number found in your Windows Device Manager (e.g., COM3).

Connect the plotter to your computer using a USB or Serial (RS232) cable.

When the installer asks for the version, choose CorelDRAW X7. If there is an option for "CorelDraw_Laser" (often used for plotter systems), select that type, then click Install. 4. Enable VBA (Crucial Step)

Follow these steps to ensure the Mycut plugin installs correctly: 1. Close CorelDRAW Mycut Plugin Coreldraw X7

Most standard MyCut plotters use a baud rate of 38400 or 9600 . Refer to your specific hardware manual to verify. Designing for the Vinyl Cutter

The plotter only reads vector lines (paths). If you are working with a raster image (PNG or JPEG), you must convert it first: Select the image.

Look under "Ports (COM & LPT)". If you see a yellow warning icon next to your device, download and install the .

Locate the extracted .gms file (the CorelDRAW Global Macro Storage file). The Mycut plugin is a specialized software extension

Ensure CorelDRAW X7 (32-bit or 64-bit) is fully installed and updated on your Windows operating system. Step 2: Driver Installation

Click and drag the new toolbar to your preferred screen location. Configuration and Plotter Setup Communication Settings

Vinyl cutting requires seamless communication between design software and hardware. For owners of Mycut cutting plotters, the serves as the vital bridge that transforms digital vector designs into precise physical cuts. CorelDRAW X7 remains a highly popular choice for sign makers, apparel designers, and craft professionals due to its robust vector tools and stability.

Windows 7, Windows 8, Windows 10, or Windows 11 Port Connections: USB 2.0, USB 3.0, or COM/Serial port Connect the plotter to your computer using a

Your version of CorelDRAW might be missing VBA support, or the macro was blocked.

Sends designs directly to MK, MG, and other Mycut series plotters via USB or serial connections .

Proper USB-to-Serial CH340 or FTDI drivers installed on the PC. Step-by-Step Installation Guide