Onkyo Rc-799m Remote Manual -

Now, pressing will execute all three power commands with a 0.5-second delay between each.

The RC-799M was originally bundled with many Onkyo systems. If you are buying a replacement, it is compatible with a wide range of models, including the HT-R391, HT-R548, HT-R558, HT-R590, HT-R591, HT-RC330, HT-RC430, HT-S3500, HT-S5400, HT-S5500, and TX-SR309, among others.

The RC-799M features a multi-zone layout divided into logical clusters. Understanding these zones makes operating your receiver instinctive. Power and Source Selection (Top Section)

Before diving into programming, here is a quick breakdown of the physical hardware: RC-799M (Part Number: 24140799) Signal Type: Infrared (IR) Battery Type: Two AA batteries (alkaline recommended) onkyo rc-799m remote manual

Volume & Mute

Because the RC-799M is from the "Pre-HDMI-CEC maturity" era, do not expect magic.

Install two AA (1.5V) batteries. Ensure you match the positive (+) and negative (-) polarity diagrams inside the compartment. Now, pressing will execute all three power commands with a 0

is compatible with a wide range of Onkyo home theater systems and receivers, including:

Directly controls the master volume of the AV receiver, regardless of the active remote mode. MUTING: Instantly silences the audio.

The Ultimate Onkyo RC-799M Remote Control Manual & Setup Guide The RC-799M features a multi-zone layout divided into

While this guide covers 90% of the RC-799M’s features, nothing replaces the official for complete code lists and advanced functions (like "Punch-Through" programming). Here is how to obtain it:

Use the number pad to input a different command set if your external component supports multiple IR profiles. How to Reset the RC-799M Remote to Factory Defaults