Harvey Hv3 Water Softener Installation Manual Site
Note: Keep the bypass valve open and the inlet/outlet valves closed during the initial pipe modification. Step 3: Connect the Inlet and Outlet Hoses
: By preventing limescale buildup, your appliances—including your kettle, washing machine, dishwasher, and boiler—will last longer and require less maintenance.
Always refer to the printed Harvey HV3 manual supplied with your unit. This guide is for supplemental use. For technical support, contact Harvey Water Softeners directly.
If the water softener is fitted in a cellar or basement, the overflow can be run to a suitable storage tank. harvey hv3 water softener installation manual
Most likely because the hardness dial is set too high, or the water meter is sticking. See Section 6 of the manual for recalibration.
Suitable for standard residential plumbing systems (up to 3 bathrooms).
Run a mains soft tap (a tap connected to the softened water supply) for approximately five minutes to get rid of any trapped air and resin dust from the softener. The water may initially appear slightly cloudy or discoloured due to resin dust from manufacturing—this is normal and will clear quickly. Note: Keep the bypass valve open and the
The HV3 operates best between 1 and 10 bar . If your pressure exceeds 6 bar, installing a pressure-reducing valve is highly recommended.
Route this drain hose to a waste pipe, standpipe, or washing machine trap.
The Harvey HV3 water softener is a popular choice for homeowners looking to remove minerals from their water supply, reducing scale buildup and improving overall water quality. Installing the Harvey HV3 water softener requires careful planning and attention to detail. In this article, we will provide a step-by-step guide to help you through the installation process. This guide is for supplemental use
Installing a Harvey HV3 water softener is a practical and valuable home improvement that delivers long-term protection and everyday benefits. Whether you choose professional installation or tackle the job yourself, following this comprehensive guide will ensure your HV3 is installed correctly and operates efficiently for years to come.
Before diving into the installation process, it's essential to understand what makes the Harvey HV3 unique. The HV3 is a non-electric, twin-cylinder water softener that uses a mechanical, geared throughflow system rather than relying on electricity or timers. This means it regenerates only when necessary, based on actual water usage, avoiding unnecessary salt and water waste.
Once you've confirmed there are no leaks and the initial setup is complete, place the Rapid-Fit bypass in the Service position by pushing the plunger on the red side. This redirects the water flow through the water softener, beginning the softening process.