Spreadtrum Imei Tool V4.1 ❲EASY ✯❳

Ensure the device has at least 50% battery to prevent shutdown during the process. Step-by-Step Guide: How to Use Spreadtrum IMEI Tool V4.1 Follow these steps to flash or repair your IMEI. 1. Install Drivers and Open the Tool

Supports writing IMEI numbers in normal mode, calibration mode, and working mode.

It is important to note that this software is intended for repairing original IMEI numbers that have been wiped out (showing as "Null" or "000000000000000") during software modifications. Key Features of Version 4.1

: Restores invalid, null, or "0000" IMEI numbers to the original factory values. Multi-Address Writing Spreadtrum Imei Tool V4.1

Open the folder and run SPD_IMEI_Tool.exe as an administrator. 2. Configure the Tool Upon opening, you will see fields for and IMEI 2 .

: Supports writing IMEI, Bluetooth addresses, Wi-Fi addresses, and serial numbers. Dual-SIM Support

Look for the dropdown menu and select Calibration Mode (this is the most stable mode for writing NVRAM data). Step 3: Input the IMEI Numbers Go back to the main interface screen. Ensure the device has at least 50% battery

If the tool fails to detect the phone, it is almost always a driver issue. Reinstall the SPD drivers and restart the PC. Conclusion

Once you see the success message, unplug your phone and turn it on. You can dial *#06# on your phone keypad to verify that your network ID is back and working correctly!

A straightforward, clean interface that does not require advanced coding knowledge. Install Drivers and Open the Tool Supports writing

This status indicates a connectivity barrier. Check your USB cable or try a different USB port (preferably a USB 2.0 port on the back of the PC). If the issue persists, open Windows Device Manager and verify that no yellow warning triangles appear next to the Spreadtrum COM port entries. Reinstall the drivers if necessary. Write Timeout / Failed Error

: Users enter the 15-digit IMEI number found on the device's original box or under the battery.